Arrow 1.) LIke any recorder, you need to choose a source to record from.
In this case it's likely our USB audio adapter or a USB turntable, but don't forget
this record can record from any source your computer has. Click this button to
get to the windows sound mixer in either W7/Vista or XP. I've shown you the steps
in the next section below.
Important Playback Note: Any time you are using a USB audio source, you
want to set the recording section of the Windows mixer to the USB device. BUT,
set the playback section of the Windows Mixer to the built-in sound card of your
Arrow 2.) Refresh the Recorder any time you make a change.
Arrow 3.) With some sound cards when you set the Windows mixer and then
hit refresh, the names will change in the pull down boxes. Mostly this will happen
in XP. But if they don't change, close the recorder and reopen it, then you should
see the correct settings. For USB adapters, it's always necessary to plug in the
USB adapter and have it recognized by your computer before you open the recorder.
IN THE ADAPTER 1ST. With a USB adapter YOU MUST PLUG it in and be sure
your computer recognizes it BEFORE you launch the
program, or it won't be recognized.
OK Here's how to set your Windows Mixer. Click the link for the Version of Windows
you are using.
For XP, Click Here.