Want a longer Mic cable? Need to connect two PAs for more shared sound output? This 15' 1/4" male to 1/4" Male cable is your answer.
You'll find lots of uses for an extended cable. I've listed two that apply to our Mics and PAs below
Special Use For DAK No Cable Mics. DAK's No cable Mics come with 48" cables to connect the receiver to your PA or other Mic input. Usually that's much more than you need. But if you need additional distance, just pick up some of these heavy duty 15' cables. You use them instead of the cables that come with the Mics. There's no loss and no problem, just added length.
Special Use for DAK's PA Systems. DAK's PAs are perfect for groups up to 100-120 people. But what if you have a larger group? Well, we have wireless system to connect two or more PAs on the same frequency electronically. But if you already have 2 PAs and they aren't on the same frequency, then just plug this 15' heavy duty shielded cable into the REC out on one PA and to the AUX in on the 2nd and you'll get all the sound that's normally being broadcast from the first PA coming out of both PAs and you'll have separate volume control on the 2nd PA too. Very handy to have.
